
Get to know what you should look for during a roof inspection
Is your roof starting to leak? Are you starting to stress and worry? We are here to relieve that stress.
We understand that any time you have a problem with your roof, it’s a huge headache. But the truth is, you do not know how bad it is until you call a roofing contractor to inspect it.
They could be simple repairs or you could need a complete roof replacement. Whatever the case may be, Deandre Roofing is here to help you.
We inspect your roof with the utmost attention to detail that it requires. You’ll never have to bother about your roof again if you engage us.
To begin your journey to repair your leak or replace your roof, you’ll need a roof inspection. When a roofing contractor analyses your complete roof, it is known as a roof inspection.
They will check your roof penetrations, your attic ventilation, and more. Here are the 10 things your roofing contractor looks for during a roof inspection.
1.Your attic ventilation
The first thing your roofing contractor should look at when he arrives at your home is your attic. They look up to make sure it’s well ventilated so your attic can breathe.
If your attic isn’t properly ventilated, your roof will have problems. Trapped hot and cold air will drastically shorten the life of your roof. It cannot be overstated how crucial proper attic ventilation is to your roof investment.
2. Are there visible roof leaks or water stains inside?
This one is pretty obvious, but your roofing contractor will be looking for any leaks that are leaving water stains on your ceiling.
Once they know you have a leak, they’ll start looking for the cause. Once they find it, they will either repair it or, if the problem is extensive, recommend a replacement.
3. How many layers does your roof have?
When your contractor first gets on your roof, he will check to see how many layers your roof has. If the problem is considered serious enough that it would require a roof replacement, then the roof and additional layers will need to be ripped out.
If there is more than one layer, the roof replacement estimate will include the number of layers that need to be removed.
4. The condition of your roof deck
When your contractor gets on your roof, they will notice your roof deck. They will test if it is fluffy or if it is solid under their feet.
They will also check to see if the nails in your deck are still holding up. Keep in mind that your contractor can’t always tell if your deck is in bad shape just by walking on it.
Most of the time they have to check the condition after the shingles are ripped off. If the integrity of your deck is compromised, your contractor will need to replace that section during the roof replacement process.
5. Your roof vents
No matter what type of vent you have on your roof, it should be inspected. For example, if you have gable, soffit, or ridge vents, they will need to be checked for blockages.
If your home has a gas appliance, they will check to see if the expansion and contraction of the metal have pulled the fasteners out of the gas vent.
6. The shingles on your roof
Right behind proper attic ventilation, proper roof installation is the second most crucial thing to your roof investment. If your shingles were not installed correctly, you would not get the full life of your shingles.
They will also look for more obvious signs, such as missing, loose, cracked, blistered, or crooked shingles.
7. Your roof penetrations
Anything that projects from your roof is referred to as roof penetration. When your roofing contractor inspects your roof, they will check all penetrations and, if any, make sure they are not leaking.
For example, your roof pipes will have neoprene pipe protectors that will prevent water from entering your home. These develop cracks over time and if left undetected can lead to a leak.
8. Your chimney
Yes, your chimney is roof penetration, but there are several things a roofing contractor inspects that deserve their own section. They will check the flashing, the condition of the mortar, and the condition of the chimney cap.
If you have something growing out of the mortar, then your chimney is starting to get damp. Just keep in mind that your roofing contractor can diagnose and repair a problem, but some chimney repairs require you to call an actual chimney company.
9. Your roof flashing
When your contractor inspects your roof, they will check all roof flashing. Roof flashing is metal placed anywhere the shingles touch something, such as a wall, a chimney, or in open valleys.
They will make sure it is not rusty and that the integrity of the metal will withstand the elements and keep your home dry.
10. Your gutters
Your roofing contractor should examine your gutters and downspouts on a regular basis. First, they will check the integrity of both by making sure there are no cracks or open seams.
They will then look for any blockage or restricted flow that could cause debris or vegetation to get backed up.
They will also look for standing water. If your gutters have standing water, then the gutter is leaning in the wrong direction. Cleaning gutters is crucial as part of regular roof maintenance.
Deandre Roofing in Lomita has taken care of all the roofing needs of numerous residents. Our thorough inspection ensures that we don’t miss a thing during your roof inspection.
We at Deandre Roofing will do everything possible to ensure your safety. If you don’t feel comfortable doing your roof inspection or roof repairs yourself, be sure to call us without delay.